Pool Startup
Pool Startup Procedures
The pool finish will start to hydrate immediately after mixing, with the majority of hydration taking place within the first 28 days. This critical time period is when a finish is most susceptible to staining, scaling and discoloration.
Proper start-up procedures include timely brushing and constant monitoring and adjusting of the pool water.
The following recommended start-up method is based on procedures shown to produce the best aesthetic results. Due to unique local water conditions and environmental factors, parts of these recommended start-up procedures may need to be modified to protect the pool finish.
For example: filling the pool with extremely low calcium hardness, low pH or low total alkalinity levels may necessitate changes to these procedures. Brushing and monitored chemical2 adjustments will be mandatory by the homeowner or a trained pool technician during the service life of any pool surface.
For example: filling the pool with extremely low calcium hardness, low pH or low total alkalinity levels may necessitate changes to these procedures. Brushing and monitored chemical adjustments will be mandatory by the homeowner or a trained pool technician during the service life of any pool surface.
ALWAYS ADD CHEMICAL TO WATER, NEVER WATER TO CHEMICAL
Step 1
Make sure the filtration equipment is operational.
Step 2
Remove all floor return heads and directional eyeballs (if appropriate and recommended in your geographical area).
Step 3
Based on temperature and type of finish, fill the pool to the middle of the skimmer or specified water level without interruption as rapidly as possible with clean potable water to help prevent a bowl ring. Place a clean rag on the end of the hose, always placed in the deepest area, to prevent damage to the surface material. If a water truck is required, 24 inches (60 cm) of water should be placed at the deepest area for a water cushion.
Step 4
At no time should any person or pets be allowed in the pool during the fill. Do not allow any external sources of water to enter the pool to help prevent streaking.
Step 5
Test fill water for pH, alkalinity, calcium hardness and metals. Record test results.
Step 6
Start the filtration system immediately when the pool is full to the middle of the skimmer or specified water level.
Step 1
Test pH, alkalinity, calcium hardness and metals. Record test results.
Step 2
High alkalinity should be adjusted to 80 ppm1 using pre-diluted Muriatic Acid (31-33% Hydrochloric acid). Always pre-dilute
Step 3
Low alkalinity should be adjusted to 80 ppm1 using sodium bicarbonate (baking soda)1.
Brush the Pool. Test pH, Alkalinity and Calcium Hardness and repeat steps of 1st Day except for Step 6.
Step 1
Test pH, Alkalinity and Calcium Hardness and repeat 1st Day Steps 1 through 6.
Step 2
Pre-diluted2 chlorine may now be added to achieve 1.5 to 3 ppm1. NO SALT SHOULD BE ADDED FOR 28 DAYS.
Step 3
Brush the entire pool surface thoroughly at least twice daily to remove all plaster dust.
Step 1
Test pH, Carbonate Alkalinity and Calcium Hardness and repeat 1st Day Steps 1 through 5 every day for 14 days to help prevent the scaling of the pool surface.
Step 2
On the 7th day, if there is any plaster dust remaining – remove it using a brush pool vacuum.
Step 3
After the 4th Day – low calcium levels should be adjusted slowly over the 28 day period not to exceed 200 ppm1
Step 4
After the 4th Day – adjust cyanuric acid levels to 30 to 50 ppm1 based on the primary sanitizer of the pool (pre-dissolve2 and add through the skimmer).
Shop Swimming Pool Options
Coping
Tile
Walls
Features
Surfaces
FAQs
When can I start filling my newly plastered pool?
Typically, as soon as the plaster finish is applied and has set. Delays can cause cracking or discoloration.
When can I start the pool pump after filling?
As soon as the water level reaches the middle of the skimmer opening, you can start the pump to begin circulation.
What is the ideal pH level for a new pool startup?
Aim for a pH level between 7.2 and 7.6. This range is ideal for most pools.
Recent Articles
The Lifespan Saver: The Importance of Timely Swimming Pool Plaster Repair
When it comes to your backyard oasis, the sparkling blue waters of your swimming pool are the core of relaxation and enjoyment. However, over time, wear and tear on the pool plaster can compromise both its aesthetic appeal and structural integrity. At CPR Pools LLC,...
Spillways and Spa Walls: Transforming Your Pool into a Stunning Retreat
Looking to transform your pool into a stunning retreat? Adding a spa spillway or spa wall can give your pool the upgrade it needs. Not only do these features enhance the overall aesthetics of your backyard oasis, but they also provide relaxation and tranquility for...
Pool Plumbing and Equipment- The Essential Guide for Your Pool or Spa
From Design to Reality: Pool Plumbing and Equipment in Construction Are you a homeowner in California with dreams of having your own swimming pool or spa? If so, it's important to understand the ins and outs of pool plumbing and equipment. From water jets to solar...
Contact Us
Request an appointment in person or by phone
call or text 818-792-5020
Contact Us
Call or text 818-792-5020
Lic# 1098868
How To Contact Us
Service Areas
Los Angeles
Alhambra
Arcadia
Beverly Hills
Boarder ranch
Burbank
Calabasas
Camarillo
Century City
Chatsworth
See More
Cheviot Hills
Culver City
Encino
Glendale
Granada Hills
Holmby Hills
Malibu
Marina Del Rey
Mar Vista
Mission Hills
Monterey Park
North Hills
North Hollywood
Northridge
Pacific Palisades
Porter Ranch
Reseda
Rancho Park
Santa Monica
Sherman Oaks
Studio City
Sun Valley
Sunland
Sylmar Hills
Tarzana
Thousand Oaks
Toluca Lake
Universal City
Valley Glen
Valley Village
Van Nuys
Venice
West Hills
West Los Angeles
Westwood
Woodland Hills
Legal
