Pool Remodel

Surfaces Coping & Tile Hardscape Equipment Plumbing Electrical

Pool & Spa

Name: The California Pool And Spa Company LLC
Address: Tustin St, Sherman Oaks, CA, US
Telephone: 818-792-5020

Remodel

We Offer Many Pool and Spa Resurface Options

Contact us today to find out about the many plaster, composite, and pebble color choices we offer.

Plaster

Composite

Pebble

View Pool Surface Options

Installing Plaster Finish

Common Pool
&
Spa Problems

Peeling Plaster

Peeling plaster can be caused by a build-up of calcium hydroxide

Stains

Surface stains; from Calcium and salt or copper from rebar Cyanuric acid or chlorine stains on surface

Roughness

Caused by erosion of concrete surface

Ground Issues

Hill side pools – sometimes the ground shifts and structure of pool cracks – pool shifts moves as well

Loose Pebbles

Pebbles May become loose and come off. Why?
Installer over washed it or power washed too much cement out when installing or acid washed too many times or too much and dissolved cement all around stone
Stones become dislodged

Cloudy Water

Paint or epoxy can make water cloudy. Other causes include problems with the pool’s ph balance.

Temperature Gauge

Replace faulty temperature gauges

Lights

Replace worn out light fixtures. Upgrade to color LED lights.

Damaged Tile

Step tiles and floor tile needs to be plastered and not grouted.
Why? The plaster will stain the grout. So plaster is used as a replacement for grout.

Cracks

When the soil surrounding a pool shell undergoes receding, contracting, or expanding movements, it exerts stress on the pool structure, often resulting in cracks and structural damage. This issue is particularly prevalent in Southern California, especially in pools built on hillside lots.

Hillside soil movement, known as slope creep, is a common cause of pool cracking and structural failure. Other factors contributing to structural failures include low PSI gunite/shotcrete during installation, improperly placed structural steel, inadequate engineering, the use of defective or weak rebound gunite/shotcrete, thin installation of gunite/shotcrete, improper expansion and separation joints, and long plumbing runs within the structure.

Detecting these issues after pool construction and filling with water can be challenging, often requiring forensic analysis and core sampling to determine the appropriate repair method, if feasible.

Slope creep poses a significant risk, particularly for pools near descending slopes, as it causes soil movement, settling, and cracking of the pool shell.

Building codes recommend specific requirements for pools near slopes, including freestanding walls capable of supporting the water without soil support and adequate footing setback from the slope surface.

Increasing the foundation setback or implementing proper drainage and moisture control measures can mitigate the effects of slope creep. When it comes to repairing pool cracks, options include removing and replacing the surrounding gunite/shotcrete, overlapping structural steel rebar with epoxy embedding, or installing steel staples and performing epoxy injections.

However, it’s important to note that repair methods may vary in cost and effectiveness, and warranty options may be limited due to factors beyond the contractor’s control.

Leaks

Swimming Pool & Spa Leak Detection is an essential service to identify and resolve leaks in your pool. Our team of skilled technicians specializes in thorough inspections of your entire pool and spa system. Using precise techniques, we can pinpoint even the smallest leaks in your pool’s structure and plumbing.

You will receive a comprehensive ‘Leak Detection Report’ detailing the status of your pool and any issues found during the inspection. This report will provide you with the necessary information to determine the required repairs, including our recommended options. We strive to offer multiple solutions to accommodate your budget.

It’s important to note that some water loss is normal due to evaporation and regular use, so performing a Simple Bucket Test can help confirm if your pool is indeed leaking. With over 20 years of experience, Pool Leak Inspections employs cutting-edge technology for electronic leak detection.

Unlike other companies that may damage your pool deck, our expert inspectors utilize hydrophone technology to precisely locate leaks, whether in the structure or underground plumbing. In addition to electronic detection, we also employ visual inspections and dye testing. Our technicians are proficient in these tried-and-tested methods and will meticulously inspect your pool, including lights, pipe fixtures, and skimmer areas, using non-toxic dye to identify leaks.

Another effective technique we employ is pressure testing the plumbing system, which provides a definitive assessment of any pipe leaks.

Following the completion of the leak detection process and review of the ‘Leak Detection Report,’ our next step is to proceed with the necessary repairs. In most cases, we can address the repairs during the same visit, without requiring pool drainage.

However, for more extensive repairs beyond our scope, we have trusted industry partners who possess the expertise to handle any size of repair. Rest assured that our partners share our commitment to service and integrity.

We understand the importance of finding the right professionals for the job, ensuring both your peace of mind and your wallet are taken care of. At The California Pool And Spa Company, we have a dedicated office support team ready to assist you throughout this process, providing guidance and ensuring a smooth and stress-free experience.

Hollow Spots Bulges & Divots

Hollow spots, bulges, and divots on the surface of pools can be caused by a variety of factors, including:

Improper pool construction: If the pool was not built correctly or the materials used were subpar, the surface can develop hollow spots, bulges, and divots over time.

Ground shifting: When the ground underneath the pool shifts, it can cause the pool surface to become uneven, which can result in hollow spots, bulges, and divots.

Settling or sinking of pool base: If the pool base is not properly compacted, it can settle or sink over time, causing the pool surface to develop hollow spots, bulges, and divots.

Poorly mixed or applied plaster: If the pool plaster is not mixed correctly or applied properly, it can result in an uneven surface that develops hollow spots, bulges, and divots.

Water chemistry issues: If the pool water chemistry is not properly balanced, it can cause damage to the pool surface, resulting in hollow spots, bulges, and divots.

Environmental factors: Extreme weather conditions such as heavy rainfall, strong winds, and extreme temperatures can also cause damage to the pool surface, resulting in hollow spots, bulges, and divots.

Improper maintenance: If the pool is not properly maintained, it can lead to damage to the pool surface, resulting in hollow spots, bulges, and divots over time.

It is important to address any issues with the pool surface as soon as they are noticed to prevent further damage and ensure the safety of swimmers. A professional pool technician should be consulted to assess and repair any damage to the pool surface.

Pumps

Swimming pool pump issues can be a common problem that can affect the overall functionality of the pool.

The pool pump is responsible for circulating water through the pool’s filtration system, which helps keep the water clean and free of debris. Common pump issues include motor failure, clogged impellers, and leaks. These issues can result in poor water circulation, increased energy consumption, and reduced filtration efficiency. A professional pool technician can diagnose and repair pump issues, which may include repairing or replacing the motor, cleaning or replacing the impeller, or addressing any leaks. Regular maintenance and inspections can help prevent pump issues from occurring in the first place, ensuring that your pool remains clean, safe, and enjoyable..

Cracks

Cracks in the substructure of a swimming pool can be a serious issue that requires immediate attention. These cracks can occur due to a variety of factors, including improper installation, soil movement, and aging of the pool.

When left unaddressed, cracks can lead to significant structural damage, water leaks, and other safety concerns. It is important to have a professional inspect the pool and assess the severity of the cracks before deciding on the best course of action. Depending on the extent of the damage, repairs may range from patching the cracks to completely replacing the pool’s substructure.

Regular maintenance and inspections can help prevent cracks from forming in the first place, ensuring that your pool remains safe and functional for years to come.

Leaks

Leaks around pool plumbing equipment can be a common problem and can cause significant damage if not addressed promptly. These leaks can occur at any point in the plumbing system, including the pump, filter, and valves. Common causes of leaks include worn or damaged seals, loose connections, and cracks in the pipes. It is important to address any leaks as soon as possible to prevent water damage to the surrounding area and to avoid wasting water. A professional pool technician can locate the source of the leak and determine the best course of action, which may include repairing or replacing the affected equipment or parts. Regular maintenance and inspections can help prevent leaks from occurring in the first place, ensuring that your pool plumbing system remains in good working order.

Leaks found in the pool flooring or walls can be a serious issue that requires immediate attention. These leaks can occur due to a variety of factors, including cracks in the pool surface, damage to the pool shell, or faulty plumbing. When left unaddressed, leaks can cause significant damage to the pool structure, surrounding areas, and can result in water loss. It is important to have a professional inspect the pool and assess the severity of the leaks before deciding on the best course of action. Depending on the extent of the damage, repairs may range from patching the leaks to completely replacing the pool surface or shell. Regular maintenance and inspections can help prevent leaks from forming in the first place, ensuring that your pool remains safe, functional, and enjoyable for years to come.